Sale!

Sierra Flame by Amantii Venting for Newcomb / Bennett / Stanford / Austin / Palisade / Thompson Gas Fireplace

$51.00$421.00

SKU: 7859907166346-sierra-flame-by-amantii-venting-for-newcomb-bennett-stanford-austin-palisade-thompson-gas-fireplace Tags: , ,

Description

DESIGN INTEGRITY, QUALITY CRAFTSMANSHIP & ATTENTION TO DETAIL

Termination Kit
This termination kit comes equipped with a 4″ and 7″ vent line that works well with six of the Sierra Flame fireplace units, including Newcomb, Bennett, Stanford, Austin, Palisade, and Thompson.  The kit includes two vents at the dimensions specified above with a stainless steel termination device. Customers are required to supply their own flex line extension or purchase a 10′ 4″ x 7″ flex length for installation.  The termination kit is high-quality and well-equipped to provide the safety and security that customers appreciate and desire.

4″ x 7″ Couplings
This pair of stainless steel couplers is compatible with Newcomb, Bennett, Stanford, Austin, Palisade, and Thompson direct-vent units.  This 4″ x 7″ flex extension coupler kit contains two couplers – one for the inner flex line tube that suctions in the air for combustion and one for the outer flex line tube used to expel combustion particles from the home.  Each coupler has the capacity to make either a 1-4″ connection or a 1-7″ connection for secure fittings on the venting line.

Dura-Hard
Not all vent installations are created equally. Some installs require many different pipes going in different directions, others require one pipe going one direction. If your install requires a hard pipe adapter directly off the fireplace than the Sierra Flame Dura-Hard Black Vent Pipe Adapter is the tool for you. This durable component comes in a black finish that will fit any décor with a strong construction that will last you and your hearth a long time to come.

Dura-Flex
When you start to install your new fireplace you have to make sure it is vented properly. That’s where this Sierra Flame Dura-Flex Galvanized Adapter for Flex Vent Pipe to Rigid Vent Pipe come in. Not all vent installations are the same. When you need to go from flex pipe to rigid pipe in your venting install, the Sierra Flame Dura-Flex galvanized adapter will do the trick. You’ll also find this Sierra Flame Dura-Flex adapter is hearty with it’s sturdy construction so you know once installed you’ve put your trust in the right brand to do the job.

All models come 4″ & 7″ Flex Ready

TERM-KIT

  • Termination kit for 4″ & 7″ vent Includes: 1 wall thimble, Horizontal term vent, No flex included.
  • * Must supply own flex or purchase 10′ 4″ x 7″ flex length only
  • Size: 4 Inch
  • Color: Black
  • Termination kit for 4 x 7″ venting
  • Termination kit for Sierra Flame direct vent fireplaces

*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

* Please Note: Customer supplies their own flex vent pipe.

SF94217405 

  • If 5′ of flex is required, use this kit:
  • “4”X 7” Horizontal Flex Termination Kit w/ 5’ of Flex, Horizontal Termination, Wall Thimble.
  • Includes Coaxial flex lengths, horizontal termination, wall thimble, screw package, sealant

SF94207410

  • To extend SF94217405 an additional 10′ purchase this:
  • 4” X 7” Coaxial Flex, 10’ Length Extends SF94217405 – 5’ Flex Kit Couplers Sold Separate – SF942074C

SF942074C

  • 4” X 7” Flex Extension Coupler Kit (1-4” & 1-7”)
  • Includes 2 couplers, 1 for the inner flex and 1 for the outer flex
  • Size: 4 Inch
    Color: Stainless Steel
    One 4″ flexible vent pipe coupler
    One 7″ flexible vent pipe coupler
    4″ x 7″ flexible vent pipe extension coupler kit

*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

DURA-HARD

  • For Hard pipe only installations
  • Adapter to use hard pipe off of fireplace
  • Size: 4 Inch
  • Transitional adaptor
  • Constructed from galvanized steel
  • Connects flexible vent pipe to rigid vent pipe

*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

 

DURA-FLEX

  • To convert from flex to hard pipe
  • Galvanized adapter to go from flex to hard pipe
  • Size: 3 Inch
  • Transitional adaptor
  • Safely transitions flexible vent pipe to rigid vent sections

*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

Reviews

There are no reviews yet.

Be the first to review “Sierra Flame by Amantii Venting for Newcomb / Bennett / Stanford / Austin / Palisade / Thompson Gas Fireplace”

Your email address will not be published. Required fields are marked *